The big pattern of manufacturing transfer to China is based on the objective needs of resource optimization and allocation in the context of globalization, and there will be no reversal. At present, the output value of China's manufacturing industry is generally between Japan and the United States, but the level of physical output has greatly exceeded that of Japan and the United States. China has ranked first in the world for machine tools consumption for five consecutive years.
In 2007, China's machine tool ownership reached 5 million units, far exceeding the developed countries, and the number of CNC machine tools reached 600,000 units. The number is comparable to that of Japan and the United States, but the grade is low. In developed countries, the use of efficient tools to harness the potential of digital manufacturing technology has become a consensus. Annual tool consumption is about 50% of machine tool consumption. In China, tool consumption is only 20% of machine tool consumption, indicating that in China's tool consumption, cheap and inefficient traditional tools still dominate the mainstream, machine tool functions are far from being fully utilized, and the potential for manufacturing to increase labor productivity is great. This is not only the gap between China's tool industry, but also the use of China's tool industry. The golden key to developing the Chinese tool market is to develop modern and efficient tools to replace cheap, inefficient traditional tools.
Through the above analysis, it can be clearly seen that the biggest opportunity facing Chinese tool companies is that at our doorstep, there is a world's largest tool market, which provides sufficient space for our development. However, we are faced with severe challenges. The modern and efficient tools that the market needs, we are developing very slowly, unable to meet the needs of the manufacturing industry, and have to import a lot. Traditional standard knives that do not meet the needs of modern manufacturing development are blindly developed, and the total amount is out of control, resulting in a passive situation of overproduction and low-price marketing. Therefore, there is only one way out for China's tool industry, that is, to develop modern and efficient tools, to achieve structural adjustment and industrial upgrading, and to get rid of the low-level and repetitive development path.
Diamond Sharpening Stones is a abrasive honing stones have man made diamonds bonded to a hard, rustles surface which provides an abrasive surface that is harder than any other material - Diamond Stones are very sharp and capable of lasting almost indefinitely. Use Diamond Stones to sharpen or lap almost anything, from tool steel to carbides to glass and ceramics (including ceramic stones). Whenever practical, wetting the stones with water or light oil will virtually eliminate clogging while you sharpen,but they can be used dry as well.
One of the most common arguments for using diamond sharpening plates is that they are flat and do not become hollowed out during their working lives. The first point is only partly true, as the flatness of the plates depends a great deal on the quality of, and the method used to manufacture the plate. But it is true that they do not become hollow in use, like other kinds of sharpening stones do.
Special Diamond Tool,Diamond Sharpening Stone,Rotary Diamond Bit,Polishing Honings Stone,Abrasive Honing Stones
Hans Superabrasive Material Co., Ltd. , https://www.hansuperabrasive.com