Maintenance of the oil-fired boiler system 1. The anti-freezing fuel contains moisture, which makes the fire unstable, and causes a "breaking fire" in severe cases. Therefore, the fuel should be waterproof from transportation and storage. The bottom of the tank and the daily fuel tank should have a hydrophobic device. When burning, it should be hydrophobic when it is unstable. 2, anti-static fuel is very susceptible to friction to generate static electricity, oil can generate static voltage above 2OOV when pipeline is transported or unloaded, under the action of static voltage, the oil layer is broken down, which will cause discharge and spark, oil can be Steam igniting, static electricity is one of the causes of fuel combustion and explosion, so the internal part of the entire oil system must be discharged in time, all the pipes, oil tanks, equipment, containers and unloading stations in the oil system should be Grounding, the general grounding resistance is below 5Ω, and it should be verified once a year. 3. Various filters of fuel filter and heater fuel system must be cleaned regularly. Light oil filters should be cleaned every month - using appropriate solvents and compressed air. The rotating handle of the heavy oil filter should be rotated left or right when needed, and rotated at a certain angle. When using it, do not use any tools. The heavy oil filter should periodically clean the container and the filter column depending on the quality of the oil. The filter column should be completely dipped with the solution, and should not be disassembled. The fuel heater should be disassembled regularly and used to remove carbon deposits or grease from the inner wall of the vessel and the heating pipe with chemicals or tools. And should always pay attention to the steam outlet or steam trap of the heating pipe. If there is oil stain, it proves that the heating pipe in the heater has been leaked and should be disposed of immediately. For details, please visit: http:// http://news.chinawj.com.cn Edit: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Ridge cap Roll Forming Machine
Ridge Cap Roll Forming Machine components: Man-made uncoiler, roll forming machine, computer control
system, hydraulic control system, cutting
The specifications of ridge cap roll forming machine: the machine can be customized based on your detail requirements.We promise to provide high quality roll forming machines with best price.
Description of ridge cap roll forming machine:
Thickness of material: 0.3-0.8mm
Main structure:400H steel
Wall plate: 14mm
Diameter of shaft: Ф70 solid
Chain: P=25.4
Bear: 6210
Electric motor power: 4KW
Reducer: 5# cycloid reducer
Roller: 14rows
Forming speed: 8-10m/min
Material of Rollers: Carbon Steel 45#
Cutting type: Hydraulic shearing
Motor: 380V, 50HZ/3 phase
Electrical part:CHINT,Delixi
Hydraulic motor: 3KW
Tail cutting material: Delta PLC-14ES
Warranty: 12 months limited warranty
Delivery: 30 days after receipt of advance payment
Package: Plastic packing and nude in the container
Payment Term: T/T, L/C, Trade assurance
FAQ:
1. Q: Are you a manufacturer?
A:Yes, we are manufacture with our own factory.
2. Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address we have rich experience in
transport.
3. Q:Can you supply the raw materials?
A:Yes,we can supply the Galvanized Steel Coil,galvalume Steel Coil,color steel
coil,and aluminum coil
Ridge Cap Roll Forming Machine
Ridge Cap Roll Forming Machine,Waterproof Ridge Cap Roll Forming Machine,Galvanized Ridge Cap Roll Forming Machine,Custom Ridge Cap Roll Forming Machine
Shijiazhuang Zhouming Steel Building Materials Co., Ltd. , https://www.zmsteels.com