Stones with natural beautiful patterns and colors are more unique than other decorative products. It provides designers with a broad design space, and in the current era of pursuing nature, advocating green and becoming a fashion, more and more people in home decoration are also using some natural stone. Here, the author warmly reminds that after selecting the stone in the decoration, it is necessary to pay attention to cleaning and maintenance.
Do not use non-neutral detergents. Stone is afraid of liquids with strong acidity and alkalinity. When cleaning stone, it is not necessary to quickly clean the stone and ignore the ingredients of the detergent. Generally, detergents contain acidity and alkalinity. Therefore, if the cleaning agent of unknown composition is used for a long time, the surface gloss of the stone will be lost. In addition, the residue of non-neutral chemicals on the stone is also the main cause of stone lesions in the future.
Do not wax at will. There are many kinds of waxes on the market, such as water-based wax, stearic acid wax, oily wax, acrylic wax and so on. These waxes basically contain acid and alkali substances. Not only will it block the capillary pores of the stone, but it will also be stained with dirt to form wax scale, which will cause yellowing of the stone surface. When it is necessary to wax at a place where pedestrians and goods are frequently distributed, the professional maintenance company must be instructed to use wax and maintenance methods.
Do not cover carpets and sundries for a long time. In order to keep the stone breathing smoothly, it should avoid covering the carpet and debris for a long time on the stone surface, otherwise the moisture under the stone cannot be volatilized through the pores of the stone. Stones can cause annoying stone lesions due to excessive moisture and increased water content. If you must lay carpets and pile up debris, don't forget to move them often.
Be completely clean and clean. Whether it is hard granite (hardness HRs88-1114-7) or softer marble (hardness HRs46-773-5), it is not resistant to wind and sand. Therefore, it is necessary to use dust collectors or electrostatic mops to thoroughly perform dust removal and cleaning work. It is best to place the dust-removing mat at the entrance of the commercial space to avoid sanding the stone with the sand. It is best to change the slipper after the entry to reduce the sand and dust.
Regular protection is required. To protect the life of the stone, the penetration of water and pollution sources must be regular (depending on the type of stone and the quality of the protective agent. It is best to do 1~2 times in 1~3 years) for protection.
Immediately remove the pollution. All stones have natural pores, and the source of pollution (oil, tea, coffee, cola, soy sauce, ink, etc.) can easily penetrate into the interior of the stone through the pores, creating annoying stains. Therefore, we must choose a good quality stone special protective agent to prevent pollution sources from polluting the stone. It is necessary to know that all protective agents are not likely to block pollution for a long time, so once the contaminated source is on the stone, it must be removed immediately to prevent penetration into the pores of the stone.
Regular maintenance and maintenance of gloss. Dust removal and cleaning can not keep the bright stone to keep the gloss from fading. Therefore, we must regularly maintain professional stone maintenance personnel for maintenance and gloss regeneration. For example, using crystallizing liquid to recrystallize the marble surface, or using polishing powder to regenerate the marble or granite surface, or using a breathable gloss protectant, etc., can make your stone last forever.
Always keep it ventilated and dry. Stone is afraid of too much ambient humidity. Water vapor will produce hydration, hydrolysis and carbonation of the stone, producing various spots such as water spots, whitening, weathering, denudation, rust yellow, etc., and destroying the stone. Therefore, the stone installation should always be kept ventilated and dry.
Pay attention to the choice of the type of protective agent. After the protective construction of the stone, it must be able to maintain the permeability, water resistance and antifouling properties of the stone. Do not use the protective agent of unknown route, so as not to achieve the protective effect, but increase the difficulty of stone maintenance.
Bowl Mill,Diamond Bowl Grinding,Diamond Grinding Stone,Diamond Grinding Tool
Hengshi Diamond Tools CO.,LTD , https://www.ryomaltools.com