The leaking of the bathroom plumbing is an annoyance in the home life. Everyone feels very annoyed when they leak water, even if the family does not meet. The upstairs and downstairs are quarrelsome and there are courtrooms. In fact, this matter is not difficult to solve. As long as we know the three conditions of water leakage in the bathroom, it is easy to solve. Here are three reasons for leaking in domestic bathrooms and how to identify leaks. Interested friends, take a look!
First, the bathroom leak judgment
Pipeline leakage refers to the leakage caused by defects such as breakage of the upper and lower water pipes, floor drains, and toilets. The inspection method is:
Water leakage
The performance of this situation is that the leakage is continuous and uninterrupted, and sometimes the amount of leakage is still increasing. If the total valve is closed, the leakage will be reduced immediately.
2. Leakage of sewage pipe
First observe the amount of leakage and record it. Then open all taps, flush the toilet several times, and pour water on the floor. If leakage occurs, it indicates that the pipeline is leaking and leaking.
3. Surface leakage
There are two ways to identify surface leakage. The specific identification methods are as follows:
(1) Leakage occurs only when bathing, mopping, etc., occurs when water and water collect on the floor and walls. In this case, the surface leakage can be determined.
(2) The use of inspection methods to identify pipeline leakage, for inspection, if it is determined that the pipeline is not leaking, it is surface leakage.
Second, the bathroom plumbing leak repair methods
If it is the bathroom pipe seepage, only plan to tile, change the pipe, and re-waterproof. If it is water seepage on the bathroom, you can use the following methods for maintenance:
(1) Clean the surface of dust, oil, water, etc., and keep the surface dry;
(2) Spray the penetrating water repellent on the entire surface that can reach the water, such as: tile surface, tile joint, wall joint, pipe root, etc.
(3) After the surface of the water repellent is dry, use waterproof paste to fill all tile joints, and damage and defects;
(4) Reinforcement with plastic steel seals for weak links such as corners, walls, and pipes.
The above are the reasons for the leaking of the toilet plumbing and how to handle it. I hope the above article has helped you. For more information on leakage treatment, please continue to pay attention to information on this site.
Bathroom pipe leaking toilet leaking toilet leaking bathroom leaking toilet leak leaking how to do bathroom leaking repair method
Gate Valve,Sluice Valve,Knife Gate Valve,Slide Gate Valve
LIANGGONG VALVE GROUP CO.,LTD , https://www.lgvalvegroup.com